Declaration Of Conformity - McCulloch CS 330 Manuel D'utilisation

DECLARATION OF CONFORMITY

EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46- -36- -146500, as authorised
representative in the Community, declare that the chain saw for forest service models
McCulloch CS 330, CS 360, CS 370, and CS 400 SAS-AV with serial numbers dating from
2012 and onwards (the year is clearly stated on the rating plate, followed by the serial number),
comply with the requirements of the COUNCIL'S DIRECTIVES:
of 17 May 2006 "relating to machinery" 2006/42/EC;
of 15 December 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable
supplements; and
of 8 May 2000 "relating to the noise emissions in the environment" in accordance with Annex
V of 2000/14/EC. For information relating to noise emissions, see Technical data section.
The following standards have been applied: EN ISO 12100-1/A1:2009, EN ISO
12100-2/A1:2009, CISPR 12:2007, EN ISO 11681-1:2008.
Notified body, 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3 S- -754 50
Uppsala, Sweden, has carried out EC type examination in accordance with the machinery
directive's (2006/42/EC) article 12, point 3b. The certificates for EC type examination in
accordance with annex IX, have the numbers: 0404/09/2035.
The supplied chain saw conforms to the example that underwent EC type examination.
12- -04- -15
Ronnie E. Goldman, Director of Engineering
Authorized representative for Husqvarna AB and
responsible for technical documentation
21