DeWalt DDF5110500 Traduction De La Notice D'instructions Originale page 44

English
Setting the ¿ ring depth:
Î
Setting the ¿ ring depth on the setting wheel
(1): Increase: turn in direction (2)
Reduce: turn in direction (3).
2
Firing the nails:
Î
Press the barrel against the material to be
fastened (1) and press the trigger (2).
If the Gas Nailer does not ¿ re:
Î
Repeat the process up to three times,
replace an empty gas cartridge (if
applicable), see chapter 3.2 „Inserting the
Gas Cartridge".
If the Gas Nailer still does not ¿ re, it is possible
that the „Sleep Mode" has activated, see
chapter 2.3 „Sleep Mode".
Î
Remove the battery and insert it again, see
the „Removing the battery from the Gas
Nailer" section in chapter 3.1 „Charging the
Battery".
1
44
All manuals and user guides at all-guides.com
3
1
2
4.2 Removing the Nail Strip
WARNING
Serious injuries due to accidental
triggering
Î
Remove the battery.
Î
Do not press the barrel of the Gas
Nailer against any surfaces.
Î
Keep your ¿ nger away from the
trigger.
Î
Unlock the nail strip with the magazine
slider.
Î
Hold the magazine downward while
pressing the nail lock (1). The nail strip will
slide out of the magazine (2).
1
2