Inglesina DARWIN INFANT RECLINE Manuel D'instructions page 43

Infant Recline car seat from the Darwin 360° i-Size base, gripping it with the handle.
fig. 44 Option 2. - Turn the seat towards yourself, then press the release button (Q)
and at the same time lift the Darwin Infant Recline seat off the Darwin 360° i-Size base.
USE WITH INGLESINA CHASSIS
For the correct use of the Inglesina chassis, refer to the dedicated manuals.
fig. 45 Properly open the chassis, following the suitable instructions. Holding
the Darwin Infant Recline child car seat by the handle, place it on the chassis on the
central pin, exclusively facing the parent, making sure that the brakes are always
properly engaged and that there is not any carrycot or seat unit installed. Then, push
the child car seat downwards until hearing both CLICK sounds indicating the occurred
hooking.
CAUTION: always make sure that the child car seat is properly hooked before use.
fig. 46 When mounted on the frame, the Darwin Infant Recline seat can be reclined
to allow the child the best position during walks.
fig. 47 To remove the child car seat, act on the rear lever (H) and simultaneously lift
it holding it by the handle.
SIÈGE AUTO DARWIN INFANT RECLINE + CEINTURE AUTO 3 POINTS
SIÈGE AUTO DARWIN INFANT RECLINE + BASE DARWIN 360° i-SIZE
CATEGORIES D'EMPLOI
• Le siège auto Darwin Infant Recline est fixé dans la
voiture avec la ceinture de sécurité à 3 points.
Cette configuration d'utilisation est uniquement possible
lorsque le dossier est complètement redressé.
• Le siège auto Darwin Infant Recline s'enclenche sur
la Base Darwin 360° i-Size avant d'être fixé au siège du
véhicule grâce aux connecteurs ISOFIX.
• Consulter le manuel d'instructions de la base Darwin
360° i-Size pour la correcte séquence d'installation dans
la voiture.
43