Inglesina DARWIN INFANT RECLINE Manuel D'instructions page 34

foreign bodies.
• CORRECT USE AND INSTALLATION OF THE CHILD
CAR SEAT CAN BE A MATTER OF LIFE OR DEATH.
THE CHILD CAR SEAT MUST BE INSTALLED IN
STRICT COMPLIANCE WITH THE INSTRUCTIONS
PROVIDED. FAILURE TO OBSERVE INSTRUCTIONS/
WARNINGS CAN SERIOUSLY COMPROMISE YOUR
CHILD'S SAFETY.
• Before assembling, verify that the product and all its components have not been
subject to damages during transport. Should this be the case, do not use the product
and keep it out of reach of children.
• For the safety of your child, remove and eliminate all plastic bags and elements
belonging to the packaging before use and, in any case, keep them out of reach of
newborns and children.
• Do not use the product, unless all its components are properly fastened and
adjusted.
• Do not use the product if any components are broken or missing.
• Assembly, disassembly and adjustment operations must be carried out only by
adults. Make sure that the person using the product (baby-sitter, grandparents, etc.)
are aware of its correct operation.
• Do not insert your fingers inside the mechanisms.
• Check that all locking mechanism that attach/tighten the child car seat to the
vehicle seat/to the base/to the chassis are secured correctly before and during use.
• When using the Darwin Infant Recline child car seat together with the Darwin 360°
i-Size Base or with the Darwin i-Size Base, before installing it, read the dedicated
instructions carefully. Make sure the indicators are green before you drive.
• When the Darwin Infant Recline car seat is used without the Darwin 360° i-Size Base
or without the Darwin i-Size Base:
- check that all parts of the belt securing the car seat to the seat are tight.
- only use the belt routing points described in the instructions and marked on the
seat.
• Do not use adapters other than those supplied with the product or in any case non
approved by the Manufacturer.
• Check if there are any special requirements related to the use of restraint systems in
the law in force in the country you are in.
• Do not make any alterations or additions to the child car seat without the approval
of the Type Approval Authority. Unauthorized technical changes can cause the
protective function of the child car seat to be reduced or completely eliminated.
• The homologation will be invalidated if you make any modifications to the product.
• Do not remove the adhesive and sewn labels. The removal of these labels could
result in the product not complying with the law.
• Never use the child car seat without the lining and the shoulder pads. They cannot
34
USE AND INSTALLATION