Publicité
Les langues disponibles
Les langues disponibles
EnGLIsh
before adjusting or changing set‑ups or when
making repairs. An accidental start-up can cause injury.
WARNING: For user servicing, the machine must be
dismantled, cleaned and serviced, as far as is reasonably
practicable, without causing risk to the maintenance staff
and others. Suitable precautions include, decontamination
before dismantling, provision for local filtered exhaust
ventilation where the machine is dismantled, cleaning of
the maintenance area and suitable personal protection.
•
The manufacturer, or an instructed person, shall
perform a technical inspection at least annually,
consisting of, for example, inspection of filters for
damage, air tightness of the machine and proper
function of the control mechanism.
•
When carrying out service or repair operations, all
contaminated items which cannot be satisfactorily
cleaned, are to be disposed of; such items shall be
disposed of in impervious bags in accordance with any
current regulation for the disposal of such waste.
•
For dust extractors it is necessary to provide for an
adequate air change rate L in the room if the exhaust
air is returned to the room.
(NOTE: Reference to National Regulations is necessary.
The charger and battery pack are not serviceable.
Lubrication
Your vacuum cleaner requires no additional lubrication.
Cleaning
WARNING: Cleaning with blowing with compressed air
is not allowed for dust class L vacuums. Wear approved
eye protection and approved dust mask when performing
this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Storage
CAUTION: Accidental damage caused by defective or
leaking batteries!
•
Always store your products with the batteries removed!
•
Store the tool and batteries in a place that is as cool and dry
as possible.
•
Follow the information in the section Battery Packs –
Transportation in this manual.
•
Store the tool and batteries in a place where they cannot be
accessed by children or unauthorized persons.
•
Check the tool and batteries for damage before use after long
periods of storage.
38
Transport
CAUTION: Accidental starting during transport!
•
Always transport your products with the batteries removed!
•
Transport the tool and batteries individually packaged.
Follow the information in the section Battery Packs –
•
Transportation in this manual.
•
Check the tool and batteries for damage before use
after transport.
Optional Accessories
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
The replacement filter (DCV5801 H) is available as an accessory
at additional cost.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to
produce sufficient power on jobs which were easily done before.
At the end of its technical life, discard it with due care for our
environment:
•
Run the battery pack down completely, then remove it from
the vacuum cleaner.
•
Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
WALT recommended
e
Publicité
