Olsberg Tipas Compact Instructions page 17

Combustion air slide valve
Regulation of combustion air
Operating lever for combustion air supply
● Operating lever on „0":
all slide valves closed
● Operating lever on „I":
Secondary air slide valve completely open /
Primary air slide valve completely closed
● Operating lever on „II":
Secondary air slide valve completely open /
Primary air slide valve completely open
Position of operating lever:
„II" ..Ignition position, max. heat output
„I" ...Nominal heat output with billet wood
„I" ...Nominal heat output with wood briquettes
„I" - „II"..Nominal heat output with lignite briquettes
„0" ..Obtain glow
● As the secondary air also contributes to the cleanli-
ness of the glass pane, the operating lever should be
set on "I" minimum. This also applies in the event of
low-load operation.
● When not operating the lever should be set on "0", to
reduce the cooling down of the room.
All manuals and user guides at all-guides.com
Fire grate
Wood storage compartment
Operating lever for the fire grate
be opened or closed to move the ash from the com-
grate back and forth.
● Primary air can only enter the combustion chamber
The wood storage compartment below the combus-
sure. It can be opened by lightly pressing on the but-
ton (Olsberg logo). Likewise it can be closed by light-
ly pressing.
● With the help of the operating lever the fire grate can
bustion chamber to the ash pan by pushing the fire
if the fire grate is set on open position.
tion chamber is fitted with a magnetic pressure clo-
press here
17