Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
Align the Front Visor on the outside of the door frame. The front flange will attach to the mirror cap. The top flange will attach to the door
Front flange
pressed securely
against mirror cap.
3
Gently press the exposed areas of tape against the surface and
verify position. With the Front Visor in its final position, remove the
remaining tape liner by pulling on free end.
4
4 Piece Set
Peel back 2" (5cm) of tape liner from forward end of top flange.
Remove tape from rear flange.
top flange
6
rear flange
Gently press the exposed areas of tape against the surface and
verify position. With the Rear Visor in its final position, remove the
remaining tape liner by pulling on free end.
8
NOTE: Actual application may vary slightly from illustrations.
free end
front flange
frame.
Mirror Cap
Apply pressure along all flnges to ensure proper adhesion of tape.
5
Align the Rear Visor on the outside of the door frame. The
rear flange attaches to the rear door applique, while the top
attaches to the top of the door frame.
7
Apply pressure along all flanges to ensure proper adhesion of tape.
9
Page 2 of 3
Publicité
