AVS Ventshade Ventvisor 92062 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean thewindow frames and trim with rubbing alcohol,
and wipe dry with a soft cloth.
1
Installation Instructions
Ventvisor
Front Driver
Side Visor
NOTE: Actual application may vary slightly from illustrations.
Deflector
®
Front Passenger
Side Visor
Clean Towel Rubbing Alcohol
Peel back 2" (5 cm) of tape liner from each end of the visors
free end
rear
flange
2
Page 1 of 2
I - Sheet Number VV83 Rev.A
flanges.
lateral flange
free end