AVS Aerovisor 95012 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the black trim with an alcohol pad, and wipe dry
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
1
vent post
Installation Instructions
Aerovisor
Front Driver
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
with a soft cloth.
Deflector
®
Front Passenger
Side Visor
Clean Towel
Remove tape liner from rear flange, and peel back 2" (5 cm) of tape
liner from each end of the lateral flange and lower flange.
free end
rear
flange
2
Page 1 of 2
I - Sheet Number AVR13 Rev.A
Alcohol Pad x2
lateral flange
free end
free end
lower
flange