Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
Align the driver's visor on the door. The lateral flange, rear end
flange, and lower flange will attach to the black trim.
3
With the visor in its final position, remove the remaining tape
liner by pulling on free ends.
5
Repeat Steps 1-6 for opposite side.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Gently press the exposed areas of tape against the surface and
4
Apply pressure along all flanges to ensure proper adhesion of tape.
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
verify position.
Publicité
