Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
3
Gently press the exposed areas of tape against the trim and verify
position. Ensure that vent window clears the visor by opening and
closing it before proceding.
4
Apply pressure along all flanges to ensure proper adhesion of tape.
6
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Align visor to the door. The lateral flange will attach to the metal step
metal step
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
lateral flange
With the visor in its final position, remove the remaining tape liner
5
Repeat Steps 1-6 for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
inside of door frame
rubber trim
metal step
tape
by pulling on free ends.
Publicité
