AVS Ventvisor 194068 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Buff the inside surface of the window channel
with scotch brite pad, then clean with alcohol
1
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
pad.
Deflector
®
Rear Driver Rear Passenger
Side Visor Side Visor
Clean Towel
Remove tape liner from front & rear flanges.
Peel back 2" of tape line from each end of top flange.
top flange
2
Page 1 of 2
I - Sheet Number VV111 Rev.A
Scotch Brite Alcohol Pad x2
Scuff Pad
Scotch Brite
Alcohol Pad x4
Scuff Pad
free end
front
flange
rear
flange