AVS Ventvisor 1752196 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Service at 800-241-7219
Important Safety Information
• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with
material, flush area with large amounts of water. If irritation persists, get immediate medical
attention. USE PREP ON RUBBER ONLY
Contents - 2 Piece Set
Front Driver
Visor
Contents - 4 Piece Set
Front Driver Front Passenger
Visor
Tools Required
Some parts require trimming excess tape along the window trim, see steps 11-12.
Preparation Before Painting / Installation
• Please review your warranty card BEFORE installation of this product.
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
All manuals and user guides at all-guides.com
Installation Instructions
Ventvisor
Front Passenger
Visor
Rear Driver's
Visor
Rear Passenger's
Visor
Visor
Utility Knife
Deflector
®
Alcohol Pad x2
Alcohol Pad x4
Safety Gloves
Page 1 of 4
I - Sheet Number VV35 Rev.A
Surface Prep
Flange Clip x2
Pad x2
Surface Prep
Flange Clip x4
Pad x2