AVS Ventvisor 194508 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit. Note that the visors are stamped with an
L or R following the part number, indicating Left or Right side placement.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle to remove any debris and/or dirt.
• Dry with a clean towel.
Installation Steps
Roll down window. Buff the inside felt surface
with scotch brite pad. Then clean with alcohol
clean
1
NOTE: visors mount on the inside of the window
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
pad.
inside of vehicle
channel.
Deflector
®
Alcohol Pad x2
Side Visor
Rear Driver
Side Visor
Clean Towel
Remove the tape liner from the front & rear flanges.
Peel back 2" of tape liner from each end of top flange.
free end
remove
2
Page 1 of 2
I - Sheet Number VV146 Rev.A
Scotch Brite
Pad
Rear Passenger Alcohol
Side Visor
Pad x4
top flange
remove
Scotch Brite
Pad
free end