Publicité
Les langues disponibles
Les langues disponibles
Setting the Clock
and Minute Timer
All manuals and user guides at all-guides.com
CONVEC
OR
PRE-HEAT
To Set the Clock
You must set the clock when the oven is first plugged in or each time the power
supply to the oven has been disconnected or interrupted. The clock must always be
set to the correct time of day, as the automatic start and stop time operations (used
to set the timed bake and self-clean modes) work directly with the clock.
1. The display window will flash "12:00." For Convection models, the oven
control may lock and then unlock the oven door. The word "Lock" will glow in
the display. The locking and unlocking of the door takes about one minute. This
is a normal part of the initial start-up and does not mean that the oven will begin
a self-clean cycle.
2. Push the CLOCK pad. The display window will stop flashing and the word
"Time" will glow in the display for a few seconds.
3. Push and hold the UP or DOWN ARROW pad until the correct time of day
appears in the display. The word "TIME" will disappear after 6 seconds and the
clock will start.
To Set the Minute Timer
The minute timer does not start or stop cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The minute timer can be used
independently during any of the oven functions and can be set for any amount of
time from 1 second to 9 hours and 50 minutes. The minute timer is not active during
the self-clean function.
1. Push the TIMER pad. ":00" and the word "Timer" will glow in the display.
2. Push the Increase or Decrease pad until the desired time appears in the
display. As soon as the set pads are released, the time will begin to count down
in the display and the word "Timer" will continue to glow.
3. When the set time has run out, the timer will beep 3 times. The timer will then
continue to beep once every 10 seconds for 5 minutes or until the TIMER pad
is pushed.
When setting the minute timer
for:
5 seconds to 2 minutes
2 minutes to 10 minutes
10 minutes to 1 hour
1 hour to 9 hours and 50 minutes
To change the minute timer while it is in use, push the Increase or Decrease pad
to increase or decrease the time.
To stop the minute timer, push the TIMER pad. The word "Timer" will disappear
from the display a few seconds later. Or, push the Decrease pad until "00" appears
in the display.
8
The time will appear in the
display and increase in:
5 second increments
10 second increments
1 minute increments
5 minute increments
Publicité
