Télécharger Imprimer la page

Renfert Silent compact Guide De Démarrage page 14

Masquer les pouces Voir aussi pour Silent compact:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
There is a risk of increased exposure to dust when replacing the fine filter.
That's why the following measures must be taken:
EN
⇒ Keep the plastic bag ready that contains the new filter.
⇒ Keep an additional dust extraction device or suction tube from another workbench extraction unit ready.
⇒ Wear at least an FFP2 mask for respiratory protection.
⇒ Clean the filter 2x:
- Switch the extraction unit off / on.
- Filter cleaning is carried out.
- Repeat the procedure.
- Switch off the extraction unit.
⇒ Disconnect the power plug, disconnect the suction hose.
⇒ Place the extraction unit so that it can be turned around.
⇒ Pull out the dust drawer.
⇒ Place the extraction unit to one side.
⇒ Unlock the clamping nut (1), loosen (2), remove, and ensure
disposal.
⇒ Pull out the fine filter
⇒ Place the fine filters immediately in the plastic bag and seal the
bag tightly to prevent dust escaping.
⇒ Ensure proper disposal.
⇒ Suction any fallen dust out of the dust room and clean room.
⇒ Turn the extraction unit upside down
⇒ Replace the O-ring of the vibration unit
⇒ Insert a new fine filter; ensure that it is correctly positioned.
⇒ Attach a new clamping nut and tighten as shown.
⇒ Turn the extraction unit back to its previous position.
⇒ Insert the dust drawer.
⇒ Connect the suction hoses, insert the power plug, and place the
extraction unit back in position.
⇒ Use the additional dust extraction device to suction up dust that
has been released.
When installing the fine filter please ensure that it is positioned
correctly, otherwise leakages may result.
See the assembly instruction at the end of the instruction manual,
which is also attached to the new fine filter.
Spare Parts
You can find components subject to wear and the spare parts on
the spare part list in the internet at www.renfert.com/p918.
Enter the following item number: 29340000
The components excluded from the warranty (such as consum-
ables or parts subject to wear and tear) are marked on the spare
part list.
Disposal Information
Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
- 6 -
2.
1.
+
1 x
Subject to change

Publicité

loading