Francepower FP 1000 Manuel D'utilisation Et D'entretien page 57

Groupes Electrogènes FP 1000 Inverter et FP 2000 Inverter
(1). If used in dirty places, the generator should be maintained more regularly.
(2). Unless the user has proper tool or he is a specialist on machine, the
maintenance of the above items should be done by the authorized agent.
Please refer to the handbook.
(3). When it is used for business purpose, you should write down the operating
hours of the generator to confirm the correct maintenance cycle.
3. Change the oil
Please discharge the machine oil quickly and thoroughly when the engine is still
hot.
Look out
Before you discharge the oil, make sure the switches on the ventilating pole of
the fuel-burning lid and the engine are on the "close" position.
6. Loosen the screw, and dismantle the repair cover.
7. Dismantle the fuel-filling lid.
8. Discharge the dirty oil thoroughly into a container.
9. Fill the recommended machine oil, and check the machine oil level.
10. Re-install the repair cover and screw the screw.
Please clean your hands with soap after dealing with the machine oil.
Attention
In order to answer for the requirement of environmental protection, we
suggest you encasing the abandoned machine oil into sealed containers, and
send it to the local repair station or recycle center. Do not pour the oil to the
ground or into the rubbish.
3. Maintenance of the air filter
Dirty air filter will block the air from entering the carburetor. In order to prevent
the carburetor from failure, please maintain the air filter regularly. If the
57