Francepower FP 1000 Manuel D'utilisation Et D'entretien page 47

Groupes Electrogènes FP 1000 Inverter et FP 2000 Inverter
16. Start the engine
Before starting the engine, cut off the load from the alternating current socket on
the engine.
Totally turn the valve to the "OPEN" position clockwise.
f)
Note: when transporting the engine, you should turn the ventilating pole of the
fuel-burning lid to the "CLOSE" position.
1 – The ventilating pole of fuel-filling
lid
Turn the switch of the engine to the "OPEN" position
g)
Turn the pulling pole of the air-blocking valve to the "CLOSE" position
h)
2 – Switch of the engine
47