Specifications - Sony VPL-CS7 Guide De Référence Rapide

Specifications

Projection system
3 LCD panels, 1 lens, projection
system
LCD panel Superhigh-aperture 0.62-inch
SVGA panel, 1,440,000 pixels
(480,000 pixels × 3)
Lens 1.2 times zoom lens (manual)
f 18.0 to 21.6 mm/F 2.2 to 2.4
Lamp VPL-CS7: 185 W UHP
VPL-ES2: 157 W UHP
Projection picture size
Range: 40 to 300 inches (diagonal
measure)
Light output VPL-CS7: 1800 ANSI
VPL-ES2: 1500 ANSI
(When the Lamp Mode is set to
"High")
Throwing distance (When placing on the floor)
When the SVGA signal is input:
40-inch: 1.1 to 1.4 m
(3.6 to 4.6 feet)
60-inch: 1.7 to 2.1 m
(5.6 to 6.9 feet)
80-inch: 2.3 to 2.8 m
(7.5 to 9.2 feet)
100-inch: 2.9 to 3.5 m
(9.5 to 11.5 feet)
120-inch: 3.5 to 4.2 m
(11.5 to 13.8 feet)
150-inch: 4.4 to 5.3 m
(14.4 to 17.4 feet)
200-inch: 5.9 to 7.0 m
(19.4 to 28.9 feet)
300-inch: 8.8 to 10.6 m
(23 to 34.8 feet)
There may be a slight difference between the
actual value and the design value shown above.
Color systemNTSC /PAL/SECAM/NTSC
3.58
PAL-M/PAL-N/PAL60 system,
switched automatically/manually
Acceptable computer signals
fH: 19 to 72 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
XGA 1024 × 768 fV: 85 Hz)
.........................................................................................................................................................................
1) ANSI lumen is a measuring method of American National Standard IT 7.228.
2) Set the resolution and the frequency of the signal of the connected computer within the range of
acceptable preset signals of the projector. For details, see the Operating Instructions contained in the
CD-ROM.
1)
lm
1)
lm
/
4.43
2)
Applicable video signals
15 kHz RGB/Component 50/60 Hz,
Progressive Component 50/60
Hz, DTV (480/60i, 575/50i,
1080/60i, 480/60p, 575/50p,
1080/50i 720/60p, 720/50p, 540/
60p), Composite video, Y/C
video
Dimensions 295 × 78 × 238 mm (11
1 3
3 / × 9
8
(without the projection parts)
Mass VPL-CS7: Approx. 2.9 kg (6 lb 6
oz)
VPL-ES2: Approx. 2.8 kg (6 lb 3
oz)
Power requirements
AC 100 to 240 V, 50/60 Hz
Power consumption
VPL-CS7: Max. 250 W
VPL-ES2: Max. 220 W
(Standby mode: 4.6 W)
Supplied accessories
Remote Commander (1)
Lithium battery CR2025 (1)
HD D-sub 15 pin cable (2 m) (1)
(1-791-992-21)
Soft case (1)
AC power cord (1)
Air filter (for replacement) (1)
Operating Instructions
(CD-ROM) (1)
Quick Reference Manual (1)
Security Label (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp (for replacement)
LMP-E180 (for VPL-CS7 only)
LMP-E150 (for VPL-ES2 only)
Signal Cable SMF-402 (HD D-sub 15-pin (male)
y 3 × phono type (male))
5
/ ×
8
/ inches) (w/h/d)
8
13
Specifications
GB