General Safety Rules - Genesis GLID12B Manuel D'utilisation

12V LITHIUM-ION IMPACT DRIVER
Operator's Manual
SPECIFICATIONS
• Model: ------------------------ GLID12B
• Rated Power: ----------------- 12V DC
• No-Load Speed: -------------- 0-2300 RPM
• Beats Per Minute: ---------- 0-3000
• Maximum Torque: ------------ 708 In-lbs
• Chuck Size: ------------------- 1/4" Hex
• Battery: ----------------------- 12V, Lithium-ion
• Charger Input: ---------------- 120V~, 60 Hz
• Charging Time: --------------- 3-5 Hours
• Net Weight: ------------------- 2.3 Lbs
Includes Impact Driver, Battery Pack, Charger, and #2 Phillips Bit
WARNING:
operator's manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WEAR YOUR
SAFETY GLASSES
FORESIGHT IS BETTER
THAN NO SIGHT
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.

GENERAL SAFETY RULES

WARNING:
drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
12V Lithium-Ion Impact Driver
Operator's Manual
T
o reduce the risk of injury, user must read and understand this
WARNING:
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding,
The Operation of any power tool can result in foreign
GLID12B