Publicité
Les langues disponibles
Les langues disponibles
Use force to push against the loading door
(push point)
2. Load your laundry (do not force it in).
Caution! Do not jam laundry in between the
loading door and rubber seal.
3. Close loading door securely. Lock must audibly
lock.
Selecting the programme
Use the programme selector to set the programme
you require. The estimated time to end of the pro-
gramme appears on the LCD, e.g.
( hours . minutes ).
During the cycle, time elapses by steps of one mi-
nute.
Dryness (Trockengrad)
Increases the dryness of the dried laundry ade-
quately to the selected level:
. This option helps to achieve satisfying re-
sult of drying.
- default dryness level.
Spin Speed (U/Min)
Shorten the drying cycle adequately to the spin
speed the laundry was spun previously in the
washing machine. The higher spin speed was, the
shorter drying cycle length. Available spin speed
values (rpm): from
steps)
This option allows to save time and energy.
Long Anti-crease (Knitterschutz Plus)
Prolongs standard anti-crease phase at the end of
the drying cycle to 90 min. When active the symbol
is on. This option helps to keep laundry free
All manuals and user guides at all-guides.com
,
,
up to
(with 200 rpm
from creases. Laundry can be removed at any time
during the anti-crease phase.
Buzzer (Signal)
Audible confirmation of:
– cycle end
– anti-crease phase start and end
– cycle interruption
– error
When active the symbol
Time (Zeitwahl)
Operates only with Time Programme (Zeitprog-
ramm). Allows to set individual time of drying from
minimum 10 min. to maximum of 3 hours (in 10
min. steps).
1. Turn the programme knob to the Time Pro-
gramme (Zeitprogramm).
2. Press the Time (Zeitwahl) button repeatedly un-
til the desired programme duration is shown in
the display, e.g.
hour and 20 minutes.
Delay Start (Zeitvorwahl)
Allows to delay the start of a drying pro-
gramme from minimum of 30 min. to maxi-
mum of 20 hours.
1. Select the drying programme and additional
options.
2. Press the Delay Start (Zeitvorwahl) button re-
peatedly until the desired delay start is shown
in the display, e.g.
to start after 12 hours.
3. To activate the delay timer, press the Start/
Pause button. Time to start elapses in the dis-
played.
Setting child lock
The child lock can be set to prevent a programme
being accidentally started or a programme in op-
eration being accidentally changed. The child lock
function locks all buttons and the programme
knob. The child lock can be activated or deactiva-
ted by holding down the Long Anti-crease (Knit-
terschutz Plus) and Buzzer (Signal) buttons simul-
taneously for 5 seconds.
– Before programme is started: Appliance
cannot be used
– After programme is started: Programme in op-
eration cannot be changed
The padlock symbol
appears in the display to
indicate that the child safety device is activated.
The child safety device is not deactivated once the
programme comes to an end.
If you want to set a new programme, you must first
deactivate the child safety device.
electrolux 53
is on.
for a programme of 1
if the programme has
Publicité
