Publicité
Les langues disponibles
Les langues disponibles
48 electrolux
1.
A
A
Open loading door.
2. Unscrew hinge A from the front of the machine
and take off the loading door.
3. Remove cover plates B . To do this, insert a
thin screwdriver into the slots as shown in the
illustration, press downwards slightly and pry
out the cover plates.
4. Use an appropriate tool and exert pressure to
unfasten locking block C from the snap-on fix-
ture, take out and re-insert on the other side
having rotated the block through 180°.
5. Unscrew hinge A from the loading door, rotate
through 180°, re-insert on the opposite side
and screw down.
6. Re-insert cover plates B on the opposite site
having first rotated them through 180°.
7.
D
E
E
D
Unscrew cover plates D from the front of the
machine, rotate through 180°, screw on the
opposite side.
8. Unscrew door lock E , push down slightly and
remove from the front of the machine.
9. Press snap-in button F in and down, press
cover down slightly and remove from front of
the machine.
10. Change door lock E over to the opposite side,
screw down the door interlock.
All manuals and user guides at all-guides.com
11. On the other side, insert cover F and allow
B
12. Insert loading door and hinges into recesses
C
Note regarding contact protection: The ma-
chine is only secure for operations again once all
B
plastic parts have been inserted.
Special accessories
• stack kit
• drain kit
F
F
• pedestal with the drawer
snap-in button to lock into place.
on the front of the machine and screw down.
Available from your Service Force Centre or
your specialist dealer
These intermediate installation kits can be used
to arrange the dryer and an washing machine
(60 cm wide, front loaded) as a space-saving
washer/dryer stack. The washing machine is at
the bottom and the dryer is at the top.
Read carefully the instructions supplied with the
kit.
Available from your Service Force Centre or
your specialist dealer
Installation kit for direct draining of condensate
into a basin, siphon, gully, etc. The condensate
tank then no longer has to be drained, it must
however remain in its intended position in the
machine.
Read carefully the instructions supplied with the
kit.
Available from your Service Force Centre or
your specialist dealer
To situate the dryer in optimal high and have
some additional space to store (e.g. laundry).
Read carefully the instructions supplied with the
kit.
Publicité
