Stihl FSE 60 Notice D'emploi page 7

Left hand on loop handle, right hand on
control handle, even if you are left-
handed.
While Working
If the power cord is dam-
aged, immediately
disconnect the plug from
the wall outlet to avoid
the risk of electric shock.
Avoid damage to the power supply cord.
Do not drive over it, pinch or tug it.
Never jerk the connecting cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
The power cord and power plug must
never be touched with wet hands.
Never spray water on the unit – risk of
short circuit!
The drive motor is not
waterproof. To reduce
the risk of a short circuit
or electrocution, never
work with the power tool
in the rain or in wet or
very damp locations.
Do not leave the unit outdoors in the
rain.
FSE 60
In case of imminent danger or in an
emergency, switch off the motor
immediately – release the trigger switch
and starting lockout.
Your power tool is designed to be
operated by one person only. Do not
allow other persons in the work area.
15m (50ft)
There is a risk of accident from ejected
objects within a wide area around the
working space, so you must ensure that
there is no-one within a 15 m radius of
the machine. This distance must also be
maintained in relation to objects
(vehicles, window panes) – risk of
property damage! Even at distances
beyond 15 m, the danger cannot be
ruled out.
Check the work site –
rocks, metal objects etc.
could get caught up and
ejected – potentially
beyond a distance of
15 m – risk of injury! Such
objects can also damage
the cutting attachment
and other property (e.g.
parked vehicles,
windows).
Never work without protection suitable
for the respective machine and cutting
tool – risk of injury from ejected objects!
Do not cut wet grass.
Take care in slippery conditions on
slopes and uneven ground.
Keep the connecting cord behind the
power tool at all times – do not walk
backwards – risk of stumbling.
Watch out for obstacles: Tree stumps,
roots – risk of tripping or stumbling!
Only work while standing on the ground,
never on a ladder, work platform or other
unstable surface.
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
Take breaks when you start getting tired
or feeling fatigue – risk of accidents!
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Proceed with caution, do not put
others in danger.
Be particularly careful when working on
difficult, densely grown terrain.
When mowing in high bushes, under
shrubbery and hedges: Hold the cutting
tool at a working height of at least 15 cm
– to avoid risks to animals.
Check the cutting tool regularly at
frequent intervals, and immediately if
you notice a change in its behavior:
Switch off the tool, hold it firmly and
–
press the cutting attachment into
the ground to bring it to a standstill,
and disconnect the plug from the
power supply.
Check condition and tightness of
–
connections, look out for fine cracks
English
5