Goetze 2400 Instructions De Montage, D'utilisation Et D'entretien page 7

Assembly and maintenance instructions
Safety valve 2400 / 2480 / 2580
1
General Notes of Safety
• Only use the valve:
- for the intended purpose
- in satisfactory condition
- with respect for safety and potential hazards
• Always observe the installation instructions.
• Remove all protective covers and other transport safety devices directly before
assembly.
• In addition to the generally valid assembly guidelines, you must ensure that the
system must be de-pressurised before removal of the safety valve. Moreover,
the system must be drained and ventilated in the case of aggressive and corro-
sive media. The safety valve must have adjusted to room temperature.
• The valves are exclusively intended for the application area stated in these ins-
tallation instructions. Any other or further use is not valid as the intended use.
• The manufacturer´s warranty shall be null and void if the sealed cover is
removed.
• All assembly work is to be carried out by authorized specialist staff.
• The fittings are perfectly prepared without lubricant for oxygen, and the plastic
bag therefore must be opened directly prior to installation.
2
General Notes
Safety valves are high-quality fittings which require a particularly careful handling.
The sealing surfaces are precision-machined at the seat and cone to attain the
required tightness. Always avoid the penetration of foreign particles into the valve
during the operation. The tightness of a safety valve can be impaired when using
hemp, Teflon tape, as well as through welding beads, among other things. Rough
handling of the complete valve during storage, transport and assembly can result
in a valve leaking. If the valves are painted, make sure that the sliding parts do not
come into contact with the paint.
Assemsembly and maintenance instructions - 2400 / 2480 / 2580 | Version: 09/2022 · V01
en
www.goetze-group.com