Changing Hydraulic Oil And Filter - Wacker Neuson RT82-SC3 Notice D'emploi

RT / RTx
7.4

Changing Hydraulic Oil and Filter

■ Container of suitable size to collect oil
Requirements
■ Fresh oil
■ New filter element
Note: In the interests of environmental protection, place plastic sheeting and a
container under the machine to collect the liquid which drains off. Dispose of this
liquid properly.
To change hydraulic oil:
1. Remove the drain plug (a) from bottom of frame and allow hydraulic fluid to
drain.
This procedure continues on the next page.
wc_tx003819gb_FM10.fm
General Maintenance
a
93
wc_gr012217