Technical Data - Hilti TE 75 Mode D'emploi

1
2
Pos.1
3
4 5
➡
6
Pos.2
Printed: 07.07.2013 | Doc-Nr: PUB / 5071193 / 000 / 00
Hilti TE 75 Combihammer
Kit supplied with TE 75
1 plastic case, 1 cleaning cloth, 1 Hilti insert tool
grease, operating instructions
Always wear ear Always wear pro- Always wear safe-
protectors. tective gloves. ty glasses.
Noise and vibration
Noise level of the tool is lower than 108 dB (A):
Wear ear protection.
The typical weighted acceleration is 11 m/s
Do not use this product in any way other than
as directed by these operating instructions.
Please refer to the respective regulations of
your trade association and the encl-osed Safety
Precautions.
6

Technical data

Power input:
Voltages:
Current input:
Frequency:
Weight:
Dimensions:
Speed under load:
Hammering speed under load:
Single impact energy:
Drilling perf. in medium-hard concrete:
Drill bits for concrete:
Insert tools:
TE-Y helical drill bits:
TE-Y GB breach bits:
TE-Y-BK core bits:
TE-Y adaptors for: TE-C drill bits, quick-release chuck for twist drills for wood and steel, setting
tools for HVA anchor
Chisels: Pointed, narrow flat, wide flat, flexible, hollow, wide channel, narrow channel and scoop
type in heavy-duty and some in light-duty versions
Chuck: TE-Y
Settings: «Rotary hammer drilling», «Chiselling only» and «Neutral»
With slip clutch
Permanent lubrication
Side handle adjustable through 360° with depth gauge
Variable speed control switch with infinite regulation
Electronic speed regulator to improve convenience
Hammering power regulator: max. = 100%, min. = 50%
Double insulation, class II (protective) as per CENELEC HD 400
Radio and TV interference suppression as per EN 55014
2 .
Servicing indicator with warning lamp
Right of technical modifications reserved
1050 W
100 V, 110 V, 115 V, 230 V, 240 V
9.6 A, 8.7 A, 8.5 A, 4.2 A, 4.2 A
50–60 Hz
7.9 kg
495×259×114 mm
255 and 185 r.p.m.
2700 and 1950 blows/min.
8.0 Joule / 4.0 Joule
25 mm dia. = 100 cm 3 /min. = 200 mm/min.
10–80 mm dia. (optimum 22–37 mm dia.)
12–37 mm dia.
40–80 mm dia.
45–150 mm dia.