FONtevo COMpact 4000 Notice D'utilisation page 42

Telephoning
4. In sequence, dial ##8, the 6-digit admin PIN (none in the factory settings), *931*, the
12-digit IP address (e. g. for 192.168.2.10: 192168002010) and #.
You will hear the confirmation tone (pulsating tone).
The entered IP address has been configured in the PBX (for subnet mask
255.255.255.0).
5. Hang up the receiver.
Opening the Configuration Manager
Requirements:
• PC with a min. screen resolution of 1024 x 768
• Recommended Browser: Mozilla Firefox (current version), Google Chrome (current
version)
1. Enter the IP address of the PBX in the address field of the browser. Example for entering
the permanent IP address: https://169.254.1.240.
Since the PBX forces an HTTPS connection, your browser will provide a safety warning
(because of the missing safety certificate).
2. If necessary, transmit the safety certificate to your working environment (user and
browser profile).
3. Click with wizard (recommended).
4. Use the configuration wizard to carry out the system activation and configure the basic
settings.
Telephoning
Outgoing Calls/Exchange Line Request
When dialling phone numbers, the exchange line request type configured for the subscriber
must be noted. The PBX distinguishes three types of exchange line requests:
Automatic exchange line request (factory setting): Neither for the internal nor for the
external number a prefix is required (exception: ** for targeted VoIP access). The PBX
automatically distinguishes between internal and external numbers with the adjustment of the
dialled phone number and the internal numbering plan:
• If the phone number is contained in the telephone numbering list, the PBX establishes an
internal connection.
• If the phone number is not contained in the telephone numbering list the PBX establishes
an external connection.
Internal telephone: The user has to dial an external number with preceding exchange line
access number.
Direct exchange line telephone: For an external number no prefix is required. However,
the user has to dial an internal number with preceding **.
42
COMpact 4000 Instructions V04 03/2017