FONtevo COMpact 4000 Notice D'utilisation page 30

Important Information
• If you are still uncertain about how to use the product properly after reading the chapter
below, please contact your specialised dealer.
• Read the instructions for the device and keep them for future reference.
• In order to use some of the features, it is necessary to extend the hardware, release it in
the Upgrade-Center, contact the network provider about activating the feature and/or set
up via the PBX configuration manager.
The COMpact 4000 is a telecommunication system; it will be referred to as PBX in the
following. This PBX connects various internal devices with various public telecommunication
networks, thereby enabling external and internal calls. For this purpose, the PBX provides a
number of different ports/interfaces. The PBX is structured modularly. It is suitable for use in
the commercial sector (small to midsize companies).
The PBX has a plastic casing for wall mounting. It is intended to be operated in closed rooms.
In addition, all of the devices connected to the system must be located in the building.
Technical Data
Power Supply
Rated voltage
Rated current
Protection class
Power
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
30
230 VAC +/-10 %, 50 Hz
Max. 0.5 A
I
Min. 6 W, max. 48 W
(depending on the configuration level of the PBX)
Power supply from the PBX
0 to +40° Celsius
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70° Celsius
10 to 90 %, non-condensing
COMpact 4000 Instructions V04 03/2017