Sony PlayStation 3 Sécurité Et Support Technique page 7

components, or the failure to connect to a properly wired
outlet, may cause sparking and pose a fire hazard.
• Do not touch the system or connected cables or accessories
during an electrical storm.
• Do not use the system or accessories near water.
• Do not allow liquid, small particles or other foreign objects to
get into the system or accessories.
• Do not touch the connectors of the system or accessories.
• Do not expose the system or accessories to dust, smoke or
steam. Also, do not place the system in an area subject to
excessive dust or cigarette smoke. Dust build-up or cigarette
smoke residue on the internal components (such as the lens)
may cause the system to malfunction.
• Do not expose the system or accessories to high
temperatures, high humidity or direct sunlight.
• Do not place the system or accessories on surfaces that are
unstable, tilted or subject to vibration.
• Do not set the system other than in the vertical or horizontal
position. When setting the system in the vertical position, use
the vertical stand (sold separately) for this model of the
system. Also, do not change the position of the system while
it is turned on.
• Be careful when carrying the system. If you do not have a
good grip, the system may drop causing potential damage or
injury.
• Keep the disc cover closed except when inserting or
removing discs. Leaving the disc cover open may result in
damage to internal components (such as the lens) or system
malfunction.
• Be careful not to pinch your hands or fingers when closing the
disc cover. This can cause injuries or system malfunction.
• Do not touch a disc while it is spinning. This can cause
injuries, damage to the disc, or system malfunction.
• Do not turn off the system while data is being saved on or
loaded from the hard disk.
• Do not move or change the position of the system while the
power indicator is lit solid green or flashing green. The
vibration that occurs as a result of moving the system may
cause data loss or corruption, or damage to the system.
• Do not stand on or put objects on the system, and do not
stack the system with other devices.
• Do not place the system and connected accessories on the
floor or in a place where they may cause someone to trip or
stumble.
• Do not allow bodily contact with the system or air from the
system vents for an extended period of time while in use.
Extended contact under these conditions may cause low-
temperature burns.
• When connecting the system to a plasma or projection* TV,
do not leave a still image on the TV screen for an extended
period of time, as this may leave a faint image permanently on
the screen.
* Except LCD screen types
• Parents are encouraged to monitor children in online activities
to ensure safe and responsible Internet usage.
About the USB device
If "An unknown USB device has been connected" is displayed
on-screen, the reason may be one of the following:
• The connected USB device is not compatible with the system.
• The connected USB device is compatible with only some
software titles.
• Too many USB devices are connected to the USB hub.
EN
7