Warranty - Baier Elektrowerkzeuge BDB 829 Traduction De L'original Du Mode D'emploi

12

Warranty

The power tools placed on the market and distrib-
uted by Maschinenfabrik OTTO BAIER GmbH take
into account the regulations of the laws concerning
engineering tools and equipment to protect against
risks to health and safety.
We guarantee the perfect quality of our products
and accept the costs of subsequent repairs by re-
placing the damaged parts or replacement with a
new tool in case of design, material and/or manufac-
turing errors within the warranty period. The war-
ranty period for commercial use is 12 months.
The following are prerequisite for a warranty claim
due to design, material and/or manufacturing errors:
1. Proof of purchase and compliance with the
instruction manual
A mechanically produced original copy of a
purchase voucher must always be submitted
in order to make a warranty claim. It must con-
tain the complete address, date of purchase and
type designation of the product.
The instruction manual for the respective
machine and the safety instructions must have
been complied with.
Damage due to faulty operation cannot be
recognised as a warranty claim.
2. Correct deployment of the machine
Maschinenfabrik OTTO BAIER GmbH's prod-
ucts are developed and produced for specific
purposes.
A warranty claim cannot be acknowledged in
the event of failure to comply with the intend-
ed use in accordance with the instruction man-
ual, misuse or use for another purpose or use of
unsuitable accessories. The warranty does not
apply if the machine is deployed in continuous
and piece-work operation or for rental and hire
purposes.
3. Compliance with servicing intervals
Regular servicing by us or a servicing and re-
pair firm authorised by us is prerequisite for war-
ranty claims. Servicing is specified for when the
carbon brushes are worn, however at least once
a year.
The machine must be cleaned in accordance
with the provisions of the instruction manual. All
warranty entitlements expire in case of interven-
tion/tampering with the machine by third parties
(opening the machine).
Servicing and cleaning work are not generally
covered by the warranty.
4. Use of original BAIER spare parts
Ensure that original BAIER spare parts and
BAIER accessories only are used. They are
available from authorised dealers. The type
and quantity of grease are to be used accord-
ing to the valid grease list. Use of non-original
parts can cause consequential damage to the
machine and an increased risk of accidents.
Dismantled, partly dismantled machines and
machines repaired with third party spare parts
are excluded from the warranty.
5. Wearing parts
Certain components are subject to use-induced
wear or normal wear and tear caused by use of
the respective power tool. These components
include, among other things, carbon brushes,
ball bearings, switches, power cords, seals,
shaft sealing rings. Wearing parts are not cov-
ered by the warranty.
| 49 |