Cake Kneading; Bread Kneading; En19 - Panasonic SD-R2550 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cake Kneading

Preparations
Remove the bread pan and set the kneading blade.
Place the measured ingredients in the bread pan.
Return the bread pan to the main unit. Close the lid and plug in.
Select menu 18
1
Set the kneading time
2
(setting range: 1 - 20 minutes)
Press
button to start.
3
● D isplay shows the remaining time until the program is complete.

Bread Kneading

Preparations
Remove the bread pan and set the kneading blade.
Place the measured ingredients in the bread pan.
Return the bread pan to the main unit. Close the lid and plug in.
Select menu 19
1
Set the kneading time
2
● P lease set the time according to the bread dough which is
used for primary fermentation.
Press
button to start.
3
● D isplay shows the remaining time until the program is
complete.
Rise
Preparations
Remove the kneading blade and place the dough into the bread pan.
Return the bread pan to the main unit. Close the lid and plug in.
Select menu 20
1
Set the time
2
(setting range: 10 - 120 minutes)
(Use the primary fermentation of kneaded dough. Set
the time according to the bread dough.)
(setting range: 1 - 20 minutes)
4
Press
button and remove the dough when
machine beeps 8 times and the cube ( ) near End
flashes.
5
Put it into cake mold, then bake in a preheated
oven.
Tips: Use a rubber spatula to avoid damaging the bread pan. Do not
use metal spatula.
Press
button and remove the dough when
4
machine beeps 8 times and the cube ( ) near END
flashes.
Tips
● R est for over 20 minutes before the next kneading starts.
● F or the case of hard dough or much amount of dough, "U50" may
appear on the display. Leave a little time to restart the next kneading.
The amount of flour that can be used is up to 400 - 600 g.
Press
button to start.
3
● D isplay shows the remaining time until the program is complete.
button and remove the dough when
4
Press
machine beeps 8 times and the cube ( ) near END
flashes.
5
Shape the finished dough and allow it to rise in
the oven, then bake.
Turn to P. EN25 for
recipes
Turn to P. EN25 for
recipes
Turn to P. EN25 for
recipes

EN19

Publicité

Table des Matières
loading

Table des Matières