TEMPUR Premium Flex Instructions D'utilisation Et D'entretien page 7

Legs
Various sets of legs are available as accessories,
enabling you to use the bed bases as freestanding
bases without a bedstead. The legs will also provide
greater stability when fixed to bases placed in
bedsteads. The legs are fixed to the base using
predrilled screw holes at each corner of the base. You
are advised to mount the legs with the help of another
person. You will find it easier if you mount the mattress
support after fixing the legs to the base. With extra-
large (120 cm and more) and extra-long (210 cm and
more) sizes, you have the option of fixing legs to the
central strut for greater stability.
Mattress support
If you use your TEMPUR ® Bed Base as a freestanding
base, you will need mattress holders to prevent the
mattress from slipping. The mattress holders are not
included and sold separately.
Dimensions
The wooden spring bases comply with DIN EN 1334
(Methods of Measurement and Recommended
Tolerances for Beds and Mattresses) specifications.
Mattress
The TEMPUR ® Bed Base is specially designed for
use with TEMPUR ® mattresses. In this genuinely
innovative bed concept, the unique pressure resistant
properties of the TEMPUR ® materials are aided by the
patented, pressure absorbing surface of the base.
Motorised bases
Please follow the instructions on the switch and the
more detailed explanation in the instruction manual.
Materials
Polymers
Only fully recyclable thermoplastic and thermoelastic
polymers go into making TEMPUR ® Bed Bases. All
synthetic parts are dyed and paint-free. We do not use
softeners or other harmful additives.
Wood
Wooden bases and spring supports are made in beech
and protected by a natural wax or covered with paper
foil. The laminated wood is made using special, non-
toxic carbamide resin. The base and spring supports
have up to 8 glued layers depending on the model,
are low in formaldehyde in compliance with European
standards and have durable elasticity.
Care
General
Clean the hinges once a year with a dry cloth. Apply
a thin layer of Vaseline or acid-free fat on the racks
at least once a year. This will prolong the life of your
TEMPUR ® Bed Base. Avoid exposing the bed base to
direct sunlight for long periods. To clean, use water or
any mild cleaning agent. Do not use deep cleaning or
scouring agents, alcohol, Cellosolve thinner, acetone
or any caustic agent. We accept no liability for damage
caused by the use of inappropriate cleaning agents.
Motorised models
The best way of avoiding noise caused e.g. by dust
particles is to grease joints and using a quality, non-
toxic, all purpose oil where possible to relevant parts
as and when needed, but at least once a year.
Dismantling Recycling
The composition of each individual part is marked to
facilitate sorting for waste disposal, i.e. all parts are
fully recyclable.
Special designs available on request.
Subject to technical alterations.
7