TEMPUR Premium Flex Instructions D'utilisation Et D'entretien page 18

Use and Care Instructions
TEMPUR-Flex™ Cloud 3000 / Tempur Premium-Flex™ 3000 / Tempur-Flex™ 3000, low profile frame with dual motors
Thank You
You have chosen a pressure relieving low profile bed frame. This product was manufactured according to
our strict quality standards. Should you, despite proper assembly and use, have any reason for complaint,
please contact your authorized dealer.
Safety Tips
Please note the following items:
- Verify the secure positioning of the bed system within
the frame.
- The low profile frame must be placed on a level base to
prevent any deformation of the mounting hardware.
- Hardware may suffer damage as a result of excessive
weight or force to concentrated areas of the inner slat
frame, such as sitting on the raised head or foot sec-
tions, for example.
- While adjusting the bed frame, assure that no body parts (including those
of third persons) can reach between the moving parts. Prohibit children
from operating the bed adjustment feature! Otherwise there is a risk of
crushing injury.
- The mechanical parts, as well as the motors, must be able to perform their
operations unencumbered and unrestrained.
- During operation, ensure that no third persons (for example children, or
even pets) are present in the area of the adjustment mechanisms.
Installation instructions
During assembly of your bed frame it is important to make certain that a
minimum of four connection points guarantee secure support.
- All cable ties must be removed from adjustable
frames before operation can begin. Prior to initial use
please assure diligently that all cable ties have been
removed, otherwise damage to the motors or frame
may result.
- Please note that the enclosed batteries are to be
inserted in the mains adaptor before use. Power
supplies without mains cut-off don't need batteries.
- This product was manufactured according to DIN EN 1725 (Beds and
mattresses: Technical safety requirements and testing procedures).
Mattress holder
Mattress holders are necessary to avoid sliding of the
mattress. The mattress holders are optionally available.
Motorised Frame
Please abide by the information on the control switch and any
additional instructions in the respective operating manuals.
2-motor drive
The motorised frame uses a dual motor drive for continuously variable adjust-
ment. Head and foot section are separately adjustable.
Power mains release
The power release feature of the mo-
tor ensures the presence of electricity
at the drives only during operation of
the remote control unit. This prevents
any build-up of a magnetic field.
In addition the power mains release
(NFS) provides for a complete net
separation between outlet and frame
and thus prevents additional electric
fields in the bedroom.
Emergency lowering feature
The frame-integrated drive technology ensures high security as cables,
fittings and motors are totally enclosed for minimising the risk of injury. The
frame is lowered only by its own weight. Therefore only the weight of the cor-
responding section of the deck area presses on the stuck body part. Injuries
and bruises are almost excluded.
In case of power failure the frame can be quickly lowered by hand without
tools and batteries.
Operating the handset
The buttons of the handset control the positioning of your bed.
(S1) and (S2) raise and lower the back adjustment
motor, (S3) and (S4) raise and lower the leg adjustment
motor. (S5) and (S6) move the back and leg adjustment
motors simultaneously.
Materials
Polymers
We exclusively utilize thermoplastic and thermoelastic polymers that may be
completely recycled after their use. Markings on the individual parts enable
the proper sorting and recycling of the plastics involved. All plastics are dyed
and not painted or lacquered. Softening agents and other damaging additives
are not used.
Wood
Wood frames and slats are constructed of laminated wood. The laminating
process uses special resins that are physiologically unobjectionable. Frames
and slats are, according to style, laminated multiple times, feature low
formaldehyde content in accordance with European standards, and assure
maximum elasticity over time.
Care instructions
This product must be protected from extended exposure to sunlight. Clean
only with pure water or mild soap. Do not use detergents, abrasives, alcohol,
acetone, or similarly aggressive cleaners. The warranty for damages caused
by using unauthorized cleaners or cleaning methods cannot be honoured.
Recycling
The bed systems are packed disassembled for efficient transportation. In
consideration of environmental protection the individual parts, once disas-
sembled, may be recycled.
Special designs available on request.
EN