Operation And Handing; Overview; Led And Battery Symbol; Charging The Battery - CASO DESIGN One Touch Cordless Vacuum Sealer Manuel D'utilisation

Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.

4 Operation and Handing

ZIP-bags, vacuum canister or WineLocks can be vacuumed with the hand-held vacuum
sealer.
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notice to avoid such dangers:
► The device must not absorb liquids or powders directly (e.g. water, oil, flour).
► If you notice that the device is sucking in liquids or powder, stop the vacuum operation
immediately by pressing the ON / OFF button.
► Then let the device run freely without contact with bags or canisters so that the remaining
liquid or powder can be pumped out of the pump.
► Then clean the device.
► We recommend freezing liquid or soft food before vacuum operation.

4.1 Overview

1. ON/OFF button with LED
2. Silicon gasket
3. Air outlet (must not be covered)
4. USB-port type C

4.2 LED and battery symbol

1. The LED lights up constantly white during the vacuum
operation
2. The device stops the vacuum operation automatically and
the white LED switches off.
3. The LED flashes red when the battery is weak and during
charging.
4. The LED lights up constantly white as soon as the battery
is charged.

4.3 Charging the battery

Charge the device at least every 3 to 6 months to ensure
optimal battery function. Charge the device fully before using
8