Keypad Lock; Backlight - Reer 5006 SCOPI Manuel De L'utilisateur

If communicating with users of other transceiver makes only use channels 1 to 8 and set the
sub codes manually, they are following international standards.
Set Channel
•
Press the MENU button once. The currently set channel flashes.
•
Press
•
Press the PTT button to confirm or simply wait a few seconds.
Channel Scan
S
Briefly press the button to automatically scan all channels for activity.
•
Press the button
•
Scanning stops after a signal is detected and you listen to the channel for 8 seconds.
Press the PTT button to stop scanning and to respond.
With no response scanning starts again.

Keypad Lock

All keys (except the PTT button and On/Off) can be locked to prevent accidentally pushing
the buttons.
Lock keypad:
•
Press and hold the button
displayed.
•
Press and hold the button again for approx. 3 seconds, until the lock icon turns off.

Backlight

The display backlight automatically comes on for 5 seconds after pressing any button.
Set CTCSS Codes
The additional CTCSS codes serve to avoid listening to other stations on the same channel.
This can even be a combination of baby and parent unit – you would not want to listen to
somebody else's baby. It is always possible that other users are on the same channel.
Do not mistake this for safety from interception: it is always possible to intercept non-encrypted
analog radio talk; this only needs any PMR 446 transceiver or a scanner.
to select a different setting.
to start scanning; press again to stop scanning.
for approx. 3 seconds, until the lock icon ( ) is
10