Roger Beep On/Off - Reer 5006 SCOPI Manuel De L'utilisateur

RX - Squelch On/Off
You can deactivate the automatic squelch and set the unit to continuously receive any
signal on the channel. This is helpful at the edge of the range and communication is
interrupted or if you just want to listen to what is happening on the channel.
RX On OF
The menu item is displayed; select or .

Roger Beep On/Off

The radio sends a tone sequence as confirmation after releasing the PTT button (as in
space travel this is called the "roger beep").
On OF
The menu item is displayed; select or .
Key Tones On/Off
A short beep tone is audible after pressing a button. Deactivate the key tones with this
menu item.
On OF
The menu item is displayed; select or .
Baby Mode – Menu Item
These menu items are displayed as described in chapter "Baby mode".
P b OF
In baby mode is displayed, select , or .
Out-Of-Range Control In PMR 446 Mode
The out-of-range control also works in PMR 446 mode:
AU Pb OF
Select between (automatic on), (only manual out-of-range test) or for deactivated
out-of-range control.
Activation or deactivation of out-of-range control is set on the unit, which wants to check the
range.
Even if the remote unit has no out-of-range control activated you can check the range from your
unit.
Select AU (automatic check every minute) or Pb (manual check).
In radio networks consisting of more than 2 equal units the out-of-range control does not really
make sense because you cannot determine, which unit responds. For this reason there is no
out-of-range control for several transceivers on the network.
12