Select Channel - Reer 5006 SCOPI Manuel De L'utilisateur

If both units display the same channel number they are ready for use.
Press the PTT button on the left side of the unit to communicate.
PTT Button To Talk
•
Press and hold the PTT button to transmit; release the button to receive.
PTT Button To Call
•
Briefly press the PTT button twice in quick succession.
•
The unit transmits a call melody to all other units on this channel within your
range.
Toggle Between Baby Monitor And Transceiver Modes
You can easily switch to transceiver mode in case your radios were set to baby monitor
mode:
•
Turn the units on.
•
Press the MENU button twice.
•
b or P (according to previous setting) flashes on the display.
•
Press
OF
must be
•
Briefly press the PTT button or wait for 5 seconds.
Volume
•
Press
The display shows the volume setting in steps between LE 00 and LE 09.

Select Channel

In Europe you can use one of 8 PMR 446 channels. Furthermore, you can individually set the
coding via CTCSS tones separately for channels 1 to 8 among 38 possible codes. This code is
displayed right from the channel number 1 to 8 as a smaller 2-digit number between 00 and 38.
5
I0
for example stands for channel 5 and CTCSS sub code 10.
To simplify operation with channels and sub codes the unit is preprogrammed with additional
channel combinations:
These are the channel numbers
PMR channels with different CTCSS codes, saving the user the trouble with codes and
channels while using the numbers 9 to 48.
You only have to take care that all communicating units are set to the same numbers
on the display.
to toggle between b, P and OF. In transceiver mode the setting
(= baby mode OFF).
to set the volume.
9 48
to . These are all combinations with one of the 8 permitted
9