Festo DNCKE 40 Serie Notice D'utilisation page 30

DNCKE/KEC
Note
Movement of the round material against the clamping forces leads to heavy wear on the
internal clamping element and the round material.
• Make sure that the holding force is never exceeded. Otherwise, unexpected move­
ment may occur.
• Make sure that the clamping unit is installed as follows:
– Operating elements always accessible
– Product fixed in such a way that it is free from mechanical stress or bending
• Check if additional external safety measures (e.g. pawls or moveable bolts) are required.
• Select the installation type for the desired application.
Refer to the Festo catalogue for more mounting alternatives (è Fig. 5) and required accessories.
5.1.1 Mounting the clamping unit
Interfaces for mounting components on the cover (examples)
with foot mounting HNC
1) è www.festo.com/catalogue
Fig. 5
30
1)
with flange mounting FNC
1)
with swivel mounting SNC
Festo – DNCKE/KEC – 1606a English
1)