Cycle Guide - Maytag 4GMVWX500 Guide D'utilisation Et D'entretien

WASH
You will hear the motor and washplate moving the load. Unlike
traditional washers, the load is not covered with water. Low-
water cleaning means concentrated cleaning. Rather than
diluting detergent as done in an agitator-style washer, this
washer delivers the detergent directly to the soils. The motor
sounds may change at different stages in the cycle. The wash
time is determined by the selected soil level.

CYCLE GUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load
being washed. Not all cycles and options are available on all models.
Items to Cycle:
wash:
Heavily soiled Whites
white fabrics
Large items Bulky
such as sheets,
sleeping bags,
small comforters,
jackets, small
washable rugs
Normal
Cottons, linens,
and mixed
garment loads
No-iron fabrics, Wrinkle
cottons, perm
Control
press, linens,
synthetics
Machine-wash Hand
silks, hand-
Wash
wash fabrics
Swimsuits and Rinse
items requiring
& Spin
rinsing without
detergent
Hand-wash Drain
items or
& Spin
dripping wet
items
No clothes in Clean
washer
Washer
6
Wash/Rinse
Spin
Temperature:
Speed:
Hot/Cold High
Warm/Cold Low
Cool/Cold No Spin
Cold/Cold
Hot/Cold
High
Warm/Cold
Low
Cool/Cold No Spin
Cold/Cold
High
Hot/Cold
Warm/Cold
No Spin
Cool/Cold
Cold/Cold
High
Hot/Cold
Low
Warm/Cold
No Spin
Cool/Cold
Cold/Cold
Hot/Cold High
Warm/Cold Low
Cool/Cold No Spin
Cold/Cold
High
Cold/Cold
Low
No Spin
High
Low
No Spin
RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning
on briefly (short hum) to move the basket while filling. Fabric
softener will be added if the Fabric Softener option was
selected. Some cycles use spray rinsing.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
DONE
Once the cycle is complete, this light will come on. Remove
the load promptly for best results.
Available
Soil
Options:
Level:
Extra Rinse
Extra Heavy
Heavy Fabric Softener
Medium
Light
Extra Heavy Extra Rinse
Heavy
Fabric Softener
Medium
Light
Extra Heavy Extra Rinse
Fabric Softener
Heavy
Medium
Light
Extra Heavy Extra Rinse
Heavy
Fabric Softener
Medium
Light
Extra Heavy Extra Rinse
Heavy Fabric Softener
Medium
Light
Cycle Details:
Extra Rinse is a default option, but may
be turned off. For maximum soil removal
use liquid chlorine bleach.
Use this cycle to wash large items such
as jackets and small comforters. The
washer will fill with enough water to wet
down the load before the wash portion
of the cycle begins, and uses a higher
water level than other cycles.
Use this cycle for normally soiled cottons
and mixed fabric loads. This cycle features
a spray rinse.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts,blouses, casual
business clothes, permanent press,
and blends.
Use this cycle to wash lightly soiled
garments indicating "Machine Washable
Silks" or "Gentle" cycle on the care label.
Place small items in mesh garment bags
before washing. This cycle uses a higher,
preset water level.
Combines a rinse and spin for loads
requiring an additional rinse cycle or to
complete a load after power interruption.
Spin speed is selectable; default is high.
This cycle uses a higher, preset water level.
Also use for loads that require rinsing only.
This cycle uses a spin to shorten drying
times for heavy fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
liquid chlorine bleach to thoroughly clean the
inside of your washer. This cycle should not
be interrupted. See "Washer Care."
IMPORTANT: Do not place garments or other
items in the washer during the Clean Washer.
Use this cycle with an empty wash tub.