6.5.2 Slider positioning
Shift the inner slide with lens and camera already
fastened into the wanted position and secure it by
means of the washers and screws provided.
Fig. 12
6.6 Replacement of the cable
glands plate with the stainless
steel plate supplied
Perforate according to the plate supplied.
Fig. 13
Useful perforation area.
Replace the standard plate by unscrewing the
fastening screws.
MNVCHGV_2222_EN
120 mm
Fig. 14
Place the gasket between the new plate and the
housing.
Fig. 15
Block the new plate using the fastening screws (Fig.
14, page 9).
9