Honda Power Products HSS622 Manuel De L'utilisateur page 41

Operation
Before operating this equipment you should read and understand the
SAFETY INSTRUCTIONS on page 3 through 8.
1.Start the engine according to the procedures described in page 29.
2.Move the throttle lever to the FAST position for normal operation.
(HT, HTS, TC, TCS)
FAST SLOW
3.Move the shift lever to select the desired drive speed.
CAUTION:
• Be sure to disengage the drive clutch before shifting gears.
• Be sure to set the shift lever into the groove.
• Never move the shift lever while the snowblower is in motion.
NOTE: Low speed (1) is recommended for removing deep or
hard-packed snow.
38
(ET, ETS, EW, LW)
THROTTLE LEVER
SLOW
FAST
FAST
SHIFT LEVER
FAST
SLOW
--- LOW SPEED
--- NEUTRAL
--- HIGH SPEED
--- NEUTRAL
--- REVERSE
SLOW