Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IntroductIon
Thank you for choosing the Dometic Wine Cellar.
Please read the following instructions carefully be-
fore installing your new wine cellar. We trust you
will be completely satisfied with your purchase.
The wine cellar must be installed and used accord-
ing to these instructions in order for it to operate
correctly and economically.
transIt damage
Inspect the wine cellar for transit damage. You
must report any damage the company responsible
for the delivery within the legal or stated time for
this type of product. If there is no such established
report time, the damage must be reported within
seven days of delivery.
accessorIes
Please check that the following accessories are at-
tached to the Wine Cellar. On the back or inside the
wine cellar.
Distance bar
Cardboard box:
•
Handle
•
Screws
•
Keys
•
CD
•
Instruction manual
Necessary additional tools not included:
•
Screwdriver (star quad)
•
Adjustable spanner or fixed spanner (21 mm)
data plate
Check the data plate, inside the
wine cellar at the top left, to
ensure you have received the
right model.
The data plate shows details
that you will need to quote if
you have to contact service personnel.
It is a good idea to make a note of them here:
Model designation . . . . . . . . . . . . . . . . . . . . . . . .
Product number . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial number . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
InstallatIon
Please follow these installation instructions:
•
For best performance, air needs to circulate free-
ly over the cooling unit behind the wine cellar.
•
The free-standing design of the cellar means that
it should stand at least 25 mm from the rear and
side walls.
•
Allow a clearance of at least 100 mm above the
wine cellar.
Steel
rod
- -
Steel
rod
Wall
25 mm
Rear
25 mm
Wall
0 mm
Publicité
Table des Matières
