EINHELL GE-CG 18/100 Li T Instructions D'origine page 18

hobby gardens. The long handle (Fig. 2/Item 5)
may only be used together with the grass shears.
Shrub shears:
The equipment is designed for cutting small
hedges and shrubs in private and hobby gardens.
The long handle (Fig. 2/Item 5) may only be used
together with the shrub shears. Equipment de-
signed for use in private and hobby gardens is
regarded as unsuitable for use in public facilities,
parks and sports centers, along roadways, or in
agriculture and forestry. The operating instructions
as supplied by the manufacturer must be obeyed
to ensure that the equipment is used properly.
Warning! This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Speed n₀ .............................................. 1200 rpm
Cutting width grass shears ..................... 100 mm
Cutting length shrub shears ................... 200 mm
Cutting thickness shrub shears .................. 8 mm
Sound pressure level L
Sound power level L
WA
Uncertainty K .............................................. 3 dB
Vibration max. a .................................... 2.6 m/s²
h
Uncertainty K ......................................... 1.3 m/s²
Weight ..................................................... 1.56 kg
Sound pressure level
at the operator's ear ............................. 74 dB (A)
Uncertainty K ............................................... 3 dB
....................... 64 dB(A)
A
P
.......................... 84 dB (A)
www.sidirika-nikolaidi.gr
GB
Caution! The equipment is supplied without re-
chargeable batteries and without a charger and is
allowed to be used only with the lithium-ion batte-
ries of the Power X-Change series.
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
•
The vibration emission level has been measu-
red in accordance with a set of standardized
criteria and can be used to compare one po-
wer tool with another;
•
The specified emission level can also be
used to make an initial assessment of the ex-
posure to vibration.
Warning!
The vibration value changes according to the
area of application of the electric equipment and
may exceed the specifi ed value in exceptional
circumstances.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
- 18 -