Setting The Time - Eterna EMC 3914A Mode D'emploi

NOTE
There is no end of winding stop. A protective mecha-
nism prevents excessive winding of the movement.
2.4

SETTING THE TIME

CROWN
LOCAL TIME
CROWN
2ND TIMEZONE HOUR
Local time: pull the crown
C. The small seconds hand
clockwise or anti-clockwise to position the hands
to the desired local time. When the hour hand passes the
12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does
not change). Check that the date set previously has not
changed.
2nd time zone hour: pull the crown
diate position B. Then turn it clockwise to position the
2nd time zone hour hand to the desired reference time.
Then push the crown
rest position A. The small seconds hand
6 PULLED OUT TO THE POSITION
6 PULLED OUT TO THE POSITION
6 out two notches to position
3
6 back in against the case to the
5 5
will stop. Turn the crown
6 out to the interme-
3 will restart.
C :
B :
1 and 2
4