General Points - Eterna EMC 3914A Mode D'emploi

2 . W I N D I N G – S E T T I N G S
2.1

GENERAL POINTS

Your watch offers one waterproofness assured until 50 m
(5 bar) of depth. It offers one waterproofness assured un-
til 100 m (10 bar) of depth. All adjustments to the watch
are carried out using the crown,
A Rest and manual winding position
B Rapid date correction and 2nd time zone hour-
setting position
C Local time-setting position with stop seconds
and date change at midnight
NOTES
Once the setting is complete, always push the
crown back in against the case to safeguard the
watch's water resistance. Never operate the crown
underwater or when it is still wet.
2.2 WINDING
CROWN
Your watch has an automatic mechanical movement
which is wound by the motion of your wrist when you
are wearing the watch. It is therefore not normally neces-
sary to manually wind the watch. However, if your watch
should stop, simply turn the crown
clockwise to restart it. When fully wound, your watch has
a power reserve of approximately 65 hours.
6 IN REST POSITION
4 4
6 which has 3 positions:
A
6 through a few turns