Rapid Date Correction; Important - Eterna EMC 3914A Mode D'emploi

NOTE
For a time setting accurate to the second, we recom-
mend pulling the crown out to position
seconds hand
back in in synchronisation with an official time signal.
2.3

RAPID DATE CORRECTION

CROWN
Pull the crown
terclockwise until the correct date appears in the window 5.
Then push the crown
position A.
NOTE
During this operation your watch continues to run
normally, hence the time does not need to be corrected.

IMPORTANT

Never correct the date between 8:00 p.m. and 2:00
a.m. The movement is in the date change process, and
could be damaged.
3 is at precisely 12 o'clock, and pushing it
6 PULLED OUT TO INTERMEDIATE POSITION
6 out one notch to position B. Turn it coun-
6 back in against the case to the rest
C when the small
6 6
B