Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.4
SETTING THE TIME
CROWN
To set the time, pull the crown
position C. Turn it in either direction to position the
hands to the desired time.
When the hour hand passes the 12 o'clock position,
you will see whether it is indicating midnight (the date
changes) or midday (the date does not change). Check
that the date set previously has not changed.
Once the setting is complete, push the crown back in
against the case to the rest position A. The hands will
restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position
when the second hand
o'clock, and pushing it back in to synchronise with
an official time signal.
5
PULLED OUT TO POSITION
6
6
C
5
out two notches to
3
is at precisely 12
C
Publicité
Table des Matières
