Setting The Time - Eterna ETA 2824-2 Mode D'emploi

NOTE
There is no end of winding stop. A protective
mechanism prevents excessive winding of the
movement.
2.3

SETTING THE TIME

CROWN
To set the time, pull the crown
tion B. Turn it in either direction to position the hands to
the desired time. Once the setting is complete, push the
crown back in against the case to the rest position A. The
hands will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position
when the central seconds hand
o'clock, and pushing it back in to synchronise with
an official time signal.
1 PULLED OUT TO POSITION
5 5
C
1 out two notches to posi-
3 is at precisely 12
B