Setting The Time - Eterna ETA 2892-A2 Mode D'emploi

NOTE
There is no end of winding stop. A protective
mechanism prevents excessive winding of the
movement.
2.3

SETTING THE TIME

CROWN
To set the time, pull the crown
tion C. Turn it in either direction to position the hands
to the desired time. When the hour hand passes the
12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does
not change). Check that the date set previously has not
changed. Once the setting is complete, push the crown
back in against the case to the rest position A. The hands
will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position
when the central seconds hand
o'clock, and pushing it back in to synchronise with
an official time signal.
1 PULLED OUT TO POSITION
5 5
C
1 out two notches to posi-
3 is at precisely 12
C