Balboa TP600 Manuel D'utilisation page 21

Masquer les pouces Voir aussi pour TP600:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 72
HOW TO USE YOUR SPA
Ready-in-Rest Mode
READY/REST appears in the display if the spa is in Rest Mode and Jet 1 is pressed. It is assumed
that the spa is being used and will heat to set temperature. While Pump 1 High can be turned on
and off, Pump 1 Low will run until set temperature is reached, or 1 hour has passed. After 1 hour,
the System will revert to Rest Mode. This mode can also be reset by entering the Mode Menu and
changing the Mode.
Main Screen
Main Screen
J
Pre-set filter cycles TP600 Control Panels
Main Screen
To next item in
Main Menu
Purge Cycles
In order to maintain sanitary conditions, as well as protect against freezing, secondary water
devices will purge water from their respective plumbing by running briefly at the beginning of
each filter cycle. (Some systems will run a certain number of purge cycles per day, independent of
the number of filter cycles per day. In this case, the purge cycles may not coincide with the start
of the filter cycle.)
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when
Filter Cycle 2 is programmed to begin.
While the Temperature is
still flashing, press Light
repeatedly until MODE
appears in the LCD.
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
Waiting
To Set
Several Seconds
Reverts to Original Setti
*****
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
Sets start hour
Selects minutes
Sets Filter 1 length in hours
Selects part of an hour
To Set
*****
Waiting several seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
Main Screen
ng
To Set
Sets start hour
Selects minutes
Sets Filter 1 length in hours
Selects part of an hour
To Set
*****
Waiting several seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
ENG
Waiting
Sets 15-minute
Several Seconds
increments
Reverts to Original
ng
Setti
*****
Sets 15-minute increments
Wait to
Revert
*****
Waiting
Sets 15-minute
Several Seconds
increments
Reverts to Original
ng
Setti
*****
Sets 15-minute increments
*****
Main Screen
Main Screen
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tp800

Table des Matières